Steel Flanges Trading, Exporting, pipe flange, forged flange, carbon steel flange, manufacturer, exporter, Jinan HyupShin Flanges Co., Ltd flange, pipe flange, forged flange, carbon steel flange, manufacturer, exporter, Jinan HyupShin Flanges Co., Ltd
  • Pipe flanges manufacturer
  • Forged Flanges Company
  • Carbon Steel flanges factory
  • Flanges DIN, ANSI, EN1092-1, JIS, BS4504
  • Steel Flanges Exporter, Supplier
  • 1
  • 2
  • 3
  • 4
  • 5
Home > Flange's Standards > Blind Flange > View  
Blind Flange

ANSI, ASME, ASA, B16.5 Pipe Flange Blind-RF

Views:   Post Date: 11/4/2011 11:04:25 AM

 

ANSI/ASME/ASA B16.5 Pipe Flange Blind-RF
hyupshin ansi flanges
hyupshin ansi flange
 
 
Dimensions & Approximate Masses of Flanges Class 150/300/600 Lbs
 
ANSI/ASME/ASA B16.5 150lb/sq.in. Flange BLIND-RF
ø D b g k Holes l Kg.
1/2" 88,9 11,1 34,9 60,3 4 15,9 0,400
3/4" 98,4 12,7 42,9 69,8 4 15,9 0,700
1" 107,9 14,3 50,8 79,4 4 15,9 0,900
1 1/4" 117,5 15,9 63,5 88,9 4 15,9 1,300
1 1/2" 127,0 17,5 73,0 98,4 4 15,9 1,600
2" 152,4 19,0 92,1 120,6 4 19,0 2,600
2 1/2" 177,8 22,2 104,8 139,4 4 19,0 4,100
3" 190,5 23,8 127,0 152,4 4 19,0 5,000
3 1/2" 215,9 23,8 139,7 177,8 8 19,0 6,400
4" 228,6 23,8 157,2 190,5 8 19,0 7,100
5" 254,0 23,8 185,7 215,9 8 22,2 9,000
6" 279,4 25,4 215,9 241,3 8 22,2 11,800
8" 342,9 28,6 269,9 298,4 8 22,2 21,000
10" 406,4 30,2 323,4 361,9 12 25,4 30,000
12" 482,6 31,7 381,0 431,8 12 25,4 45,000
14" 533,4 34,9 412,7 476,2 12 28,6 59,000
16" 596,9 36,5 469,9 539,9 16 28,6 79,000
18" 635,0 39,7 533,4 577,8 16 31,7 97,000
20" 698,5 42,9 584,2 635,0 20 31,7 124,000
22" 749,3 46,0 641,2 692,1 20 34,9 151,000
24" 812,8 47,6 692,1 749,3 20 34,9 188,000
NOTE:
1. Class 150 flanges except Lap Joint will be furnished with 0.06 (1.6mm) raised face, which is included in ‘Thickness’ (C) and ‘Length through Hub’ (Y1), (Y3).
2. For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees.
3. Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub.
4. The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (C).
5. Depth of Socket (D) is covered by ANSI B 16.5 only in sizes through 3 inch, over 3 inch is at the manufacturer’s option.

ANSI/ASME/ASA B16.5 300lb/sq.in. Flange BLIND-RF
ø D b g k Holes l Kg.
1/2" 95,2 14,3 34,9 66,7 4 15,9 0,700
3/4" 117,5 15,9 42,9 82,5 4 19,0 1,200
1" 123,8 17,5 50,8 88,9 4 19,0 1,500
1 1/4" 133,3 19,0 63,5 98,4 4 19,0 2,000
1 1/2" 155,6 20,6 73,0 114,3 4 22,2 2,900
2" 165,1 22,2 92,1 127,0 8 19,0 3,400
2 1/2" 190,5 25,4 104,8 149,2 8 22,2 5,100
3" 209,5 28,6 127,0 168,3 8 22,2 7,000
3 1/2" 228,6 30,2 139,7 184,1 8 22,2 8,900
4" 254,0 31,7 157,2 200,0 8 22,2 11,800
5" 279,4 34,9 185,7 234,9 8 22,2 15,500
6" 317,5 36,5 215,9 269,9 12 22,2 21,300
8" 381,0 41,3 269,9 330,2 12 25,4 35,200
10" 444,5 47,6 323,8 387,3 16 28,6 57,000
12" 520,7 50,8 381,0 450,8 16 31,7 82,000
14" 584,2 54,0 412,7 514,3 20 31,7 106,000
16" 647,7 57,1 469,9 571,5 20 34,9 140,000
18" 711,2 60,3 533,4 628,6 24 34,9 178,000
20" 774,7 63,5 584,2 685,8 24 34,9 223,000
22" 838,2 66,7 641,2 742,9 24 41,3 270,000
24" 914,4 69,8 692,1 812,8 24 41,3 345,000
NOTE:
1. Class 300 flanges except Lap Joint will be furnished with 0.06 (1.6mm) raised face, which is included in ‘Thickness’ (C) and ‘Length through Hub’ (Y1), (Y3).
2. For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees.
3. Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub.
4. The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (C).
5. Depth of Socket (D) is covered by ANSI B 16.5 only in sizes through 3 inch, over 3 inch is at the manufacturer’s option.

ANSI/ASME/ASA B16.5 600lb/sq.in. Flange BLIND-RF
ø D b g k Holes l Kg.
1/2" 95,2 14,3 34,9 66,7 4 15,9 0,700
3/4" 117,5 15,9 42,9 82,5 4 19,0 1,200
1" 123,8 17,5 50,8 88,9 4 19,0 1,500
1 1/4" 133,3 20,6 63,5 98,4 4 19,0 2,000
1 1/2" 155,6 22,2 73,0 114,3 4 22,2 3,200
2" 165,1 25,4 92,1 127,0 8 19,0 4,300
2 1/2" 190,5 28,6 104,8 149,2 8 22,2 6,000
3" 209,5 31,7 127,0 168,3 8 22,2 8,000
3 1/2" 228,6 34,9 139,7 184,1 8 25,4 10,500
4" 273,0 38,1 157,2 215,9 8 25,4 18,000
5" 330,2 44,4 185,7 266,7 8 28,6 28,500
6" 355,6 47,6 215,9 292,1 12 28,6 35,500
8" 419,1 55,6 269,9 349,2 12 31,7 58,000
10" 508,0 63,5 323,8 431,8 16 34,9 98,000
12" 558,8 66,7 381,0 488,9 20 34,9 125,000
14" 603,2 69,8 412,7 527,0 20 38,1 151,000
16" 685,8 76,2 469,9 603,2 20 41,3 215,000
18" 742,9 82,5 533,4 654,0 20 44,4 287,000
20" 812,8 88,9 584,2 723,9 24 44,4 366,000
22" 869,9 95,2 641,2 777,9 24 47,6 437,000
24" 939,8 101,6 692,1 838,2 24 50,8 532,000
NOTE:
1. Class 600 flanges except Lap Joint will be furnished with 0.25 (6.35mm) raised face, which is not included in ‘Thickness’ (C) and ‘Length through Hub’ (Y1), (Y3).
2. For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees.
3. Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub.
4. The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (C).
5. Dimensions of sizes 1/2 through 3 1/2 are the same as for Class 400 Flanges.
6. Depth of Socket (D) is covered by ANSI B 16.5 only in sizes through 3 inch, over 3 inch is at the manufacturer’s option.

URL: http://www.hsflanges.com/ANSI_ASME_ASA_flanges_Blind_RF.html

back    top    next   
Online Service

Sales Manager

Chat Now on Skype!
Chat Now on QQ!
Chat Now on Trade Manager!


Email For Enquiry

Email For Enquiry, Jinan HyupShin Flanges Co., Ltd


Telephone
(86)531-83297728
Fax
(86)531-83291878

╱╲
TOP